Lockouts · Doon
Break-In Damage Lock Repair in Doon
You came home to find the front door standing open.
In plain words
When a home is broken into, the locks are not the only thing that has changed hands. Keys hanging in the hall, a spare in a drawer, a garage remote on a visor or a house key on a stolen car's ring may all be gone. Part of break-in damage repair is closing that door too. Every cylinder those keys fit is rekeyed or replaced and fresh keys are cut, the mailbox and padlocks are considered, and you are reminded to reset the garage opener and any alarm codes that were written down. The forced door gets fixed, and the missing keys stop mattering at the same time.
How the visit goesPolice have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.
Break-In Damage Lock Repair
How the visit goes
Photographs before parts move
Nothing on the door is touched until it has been photographed as found. The locksmith records the door face and edge, the lock and cylinder, the strike and the wood around it, the hinges, the jamb and any broken glass, plus the tool marks that show how entry was made. These images serve the police occurrence file and the insurance claim, where insurers ask for damage to be documented and damaged property kept. You are encouraged to take your own set too. Once the record exists, hardware can come off and the repair can start without anyone later wondering what the door looked like at the beginning.
Sliding doors and garage entries
A forced patio slider is repaired by putting the panel back on its track, replacing the broken latch or fitting an auxiliary bolt into the frame, and adding the pieces that stop the next attempt: anti-lift blocks in the upper channel so the panel cannot be raised off its rollers, and a foot bolt or pin lock at the bottom. A garage man-door that carried only a knob lock gets a proper deadbolt, a boxed strike and long hinge screws to match the front of the house. Where an overhead door was the way in, the emergency release cord is shielded from outside reach and the opener remotes are reprogrammed.
New keys and a clean slate
If keys were taken, you now hold a set that fits locks nobody else can open. The cylinders were pinned to a fresh combination and the new keys were cut from that pinning, tested in each door and counted into your hand. It is worth deciding on the spot who gets one and where the spare lives, which is no longer a hook by the door. Garage remotes have been erased and re-paired, and you have been reminded to change alarm codes and any code written on paper that was disturbed. The stolen ring is now a handful of metal that turns nothing.
Break-In Damage Lock Repair
In the van
Hinge reinforcement plate
Wrap-around door edge reinforcer
Grade 1 deadbolt with one-inch throw
Anti-lift blocks and foot bolt
Three-inch strike and hinge screws
Break-In Damage Lock Repair
What affects the quote
Method of jamb repair
Bonding a split with epoxy and a repair plate is one line; fitting a new section of wood is another; a full jamb leg through a carpenter is quoted by that trade.
Commercial and storefront hardware
Narrow-stile deadbolts, hookbolts, latch guards, anti-pry astragals and interchangeable cores are commercial parts with commercial fitting time, and a shop's quote reflects them.
Sliding door hardware
Putting a slider back on its track, replacing its latch and adding anti-lift blocks, a foot bolt or an auxiliary lock is a different parts list from a hinged door, and is quoted as such.
What to have ready
- Is there glass beside the door or in it?
- Is this a suite door in an apartment or condo building?
- Have the police been called, and do you have an occurrence number?
Break-In Damage Lock Repair: questions
QuestionsSomeone reached through the sidelight to turn the thumb-turn. Should I fit a deadbolt keyed on both sides?
It is tempting, but a thumb-turn lets everyone in the household leave by that door without hunting for a key, special device or special knowledge, so a keyed inside cylinder is the wrong fix. Better answers are a tested security-film system or laminated glass in the sidelight to slow an arm from passing, moving the deadbolt beyond arm's reach of the glass where the door allows, and a glass-break sensor if you have an alarm.
How is a forced storefront door repaired?
Aluminum storefront doors are attacked at the narrow stile, which bends under a pry bar, or at the hookbolt and glass. The locksmith straightens or replaces the damaged section where possible, fits a new narrow-stile deadbolt or hookbolt with its strike, and adds a latch guard or anti-pry astragal along the meeting edge so a bar has no purchase. Cores are rekeyed and codes reviewed. The inside release stays a single motion so the exit route is unchanged.
How long does a break-in repair take?
It depends on how much gave way. A new lockset and a reinforced strike on a sound frame is a modest job. Bonding a split jamb, sleeving a crushed door edge, reinforcing the hinges and rekeying several cylinders takes longer, and a shattered frame means a securing visit now and a second visit after the carpenter. The locksmith gives a sense of the time once the damage has been seen, and the opening is secured before leaving even when a part has to be ordered.
Related services
- Business Lockout ServiceMinus eighteen with a wind, and the exterior cylinder on the shop door has frozen solid overnight after yesterday's slush.
- Broken Key ExtractionThe padlock on the shed has been stiff all summer.
- Seized & Jammed Lock OpeningThe lock works, but only if you lean on the door with your hip while turning the key.